1. Verify that the storage room floor is leveled.
2. Place wood strips of the same size, symmetrically and equidistant from each other, separated up to 650 mm between them.
3. Put 2 caps (top and bottom) at least 3.6 mm thick and same size of the board. You should put 4 bands across the width and 2 bands across the stage packed. For export purposes, an additional band is required for the formation of the base.
4. To avoid board scratches while transporting with a forklift, do not touch the bottom of the boards with the machine´s forks We recommend using a base, such as a board or a pallet, for protection.
5. During transport and storage, do not expose the panels to extreme temperature and humidity variations. Avoid panels to be directly exposed to water or sunlight.
6. Both for freight and for the unloading, packages have either legs or packaging that allows forklift entry, obtaining a correct handling and no damage to the boards. 
7. For easy identification, packages are marked with the number of boards per package, quality, product and dimensions. This leads to a proper and orderly storage.

1. Transport is done in packages, properly strapping and protected with lids on top and bottom, as well as plastic corners and plastic angles to prevent damage by pressure from the board.
2. Packages must be secured to prevent slipping and damage to panels.
3. Pallets should be stacked and strapped properly / bands.
4. Truck bed should be flat and clean.
5. Trucks will have to hold the pallets with stripes, bands or strings using the angles.
6. Pallets must be coated with a tarp to prevent damage to the edges and protect the material from rain and sunlight.