|
PRODUCT CLASSIFICATION AND SPECIFICATIONS
COTOPAXI Particle Board
It is a three-layer board formed by agglomerated
particles or wooden chips selected by sizes to which resin is added
and applied a high-pressure process and temperature. Additionally
these boards can be veneered with decorative wooden foils, melamine
and decorative papers.
A mix of Urea Formaldehyde’s resin composes
the adhesive used in its production. The particle board complies
with the following specifications or international norms: DIN 68761;
DIN 68750; ANSI A208.1; ANSI A208.1(M-3); ANSI A208.1 (M-S).
The formol emission and contents are strictly
controlled to comply with the American Standard National norms (ANSI
208.1-1993) for agglomerates.
Under these specifications the following types
of boards are manufactured:
|
COTOPAXI PARTICLE BOARD
|
Acoplac® |
Raw particle board or without covering.
|
| COTOPAXI FOIL |
Pacoplac® |
Particle board covered with decorative paper.
|
| COTOPAXI MELAMINA |
Duraplac® |
Particle board covered with melamine papers. |
| VENEERED COTOPAXI |
Madeplac® |
Particle board covered with wooden
foils. |
COTOPAXI Particle board RH
It is a three-layer board formed by agglomerated
particles or wooden chips selected by sizes to which resin is added
and applied a high-pressure process and temperature. Additionally
these boards can be veneered with decorative wooden foils, melamine
and decorative papers.
The adhesive used for its production is a resin
Melamine Urea Formol MUF elaborated under quality norms and classified
as V100, which grants a high resistance to humidity. The RH Particle
Boards comply with French norm NFB51-263.
The following types of boards are manufactured under these specifications:
| COTOPAXI RH PARTICLE BOARD |
Acoplac RH® |
RH Particle board raw or without covering,
resistant to humidity.
|
| COTOPAXI MELAMINA RH |
Duraplac RH® |
RH Particle board covered with papers
melamine, resistant to humidity. |
|
