The slipping of a board over another can cause sludge scratches on the decorative surfaces, therefore you should clean the boards before stacking them.

Avoid extreme temperature and humidity variations. Do not allow the board surfaces or edges to have contact with water.

If the boards are stored horizontally, place supports (solid wooden laths) spaced with 50 cm in between.

Laths should be properly aligned, when stacking the platforms. Platforms should be 15 cm off the walls. Place the thicker boards at the lower part of the platform.

For transportation, leave enough vertical space between platforms so that fingernails or lift platforms do not touch or scratch the boards.

Store the boards in a dry and well-ventilated place with no natural light.
When stored on platforms, leave enough space among them, to allow air circulation.